A reusable bottle lock, for simple and super quick installation, optimized for particularly easy use. The lock includes 2 parts: A. The latch is a permanent lock for one-time installation. In. The fork – a portable lock for multiple uses. Before installation, make sure that the open part of the pin is directed towards the front of the dispenser to allow the fork (the portable lock) to lock into it. The dowel should be glued to the designated slot using the tube of glue included in the package and the remaining glue should be thoroughly cleaned. 24 hours after gluing the pin, a disposable bottle can be loaded into the dispenser. Attach the mobile fork to the bottom line of the silicone stopper and then turn it left or right to finally lock it into the permanent pin that was installed in advance in the designated slot. When turning the fork, the lock should be pushed down as far as possible to insert and lock it into the open part of the pin. To replace a bottle, turn the mobile fork to the right or left and pull it out. When replacing the bottle, attach the mobile fork to the bottom of the silicone cap and turn right or left to finally lock it into the pin fixed on the back of the dispenser.